BXYHB - PRIST HI-FLASH ANTI-ICING AVIATION FUEL ADDITIVES

  • MSDS: BXYHB
  • Manufacturer: PPG INDUSTRIES INC
  • Product Name: PRIST HI-FLASH ANTI-ICING AVIATION FUEL ADDITIVES
  • National Stock Number: 6850-01-377-5314
Product Identification

Product ID:PRIST HI-FLASH ANTI-ICING AVIATION FUEL ADDITIVES
MSDS Date:05/17/1995
FSC:6850
NIIN:01-377-5314
MSDS Number: BXYHB

Responsible Party
PPG INDUSTRIES, INC
ONE PPG PLACE
PITTSBURGH, PA 15272
US

Emergency Phone: 205-851-1016/304-843-1300

Cage: DO894

Contractor
PPG INDUSTRIES, INC.
9 ALLISON PARK, PA 15101 US

Telephone: 412-592-5555

Cage: DO894

Ingredients

DIETHYLENE GLYCOL MONOETHYL ETHER

CAS: 111-90-0

RTECS: KK8750000

Fraction By Weight: >99%

Hazards

LD50 LC50 Mixture:ORAL LD50 (RAT) IS 5.5 GM/KG UNDILUTED
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE-DIETHYLENE GLYCOL MONOMETHYL
ETHER IS AN EYE & MUCOUS MEMBRANE IRRITANT, A NEOPHROTOXIN &
CENTRAL NERVOUS SYSTEM DEPRESSANT. IT IS TOXIC BY ABSORPTION.
CHRONIC-FETAL DEVELOPMENT ABNORMALITIES & EFFECTS ON FERTILITY
HAVE BEEN REPORTEDTO OCCUR FROM PROLONGED INGESTION BY RATS, MICE &
RABBITS.
Explanation of Carcinogenicity:THIS CHEMICAL IS NOT LISTED AS A
CARCINOGEN OR POTENTIAL CARCINOGEN.
Effects of Overexposure:INHALATION-MAY CAUSE IRRITATION TO THE MUCOUS
MEMBRANES. EYE-MAY CAUSE PAIN & TRANSIENT INJURY. SKIN-MATERIAL CAN
BE ABSORBED THROUGH SKIN IN TOXIC AMOUNTS WHEN CONTACT IS EXTENSIVE
& PROLONGED.
Medical Cond Aggravated by Exposure:NONE KNONW.

First Aid

First Aid:INHALATION-REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE
ARTIFICIAL RESPIRATION. IF BREATHING IS HARD, GIVE OXYGEN. CALL
PHYSICIAN. EYE OR SKIN-FLUSH EYES & SKIN WITH PLENTY OF WATER (SOAP
& WATER FOR S KIN) FOR AT LEAST 15 MIN. CALL PHYSICIANFOR
IRRITATION. INGESTION-IF CONSCIOUS, DRINK LARGE AMOUNTS OF WATER,
THEN INDUCE VOMITING BY PLACING FINGER FAR BACK IN THE THROAT. CALL
A PHYSICIAN.

Fire Fighting

Flash Point Method:TCC
Flash Point:192F,89C
Lower Limits:1.2
Upper Limits:22.0
Extinguishing Media:WATER, DRY CHEMICAL, CARBON DIOXIDE, OR FOAM.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR NIOSH/MSHA APPROVED
PRESSURE DEMAND SELF-CONTAINED BREATHING APPARATUS. KEEP PERSONNEL
REMOVED AND UPWIND.
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:IMMEDIATELTY EVACUATE THE AREA & PROVIDE
MAXIUM VENTILATION. ONLY PERSONNEL EQUIPPED WITH PROPER RESPIRATORY
& SKIN/EYE PROTECTION SHOULD BE IN AREA. DIKE AREA TO CONTAIN
SPILL. RECOVER SPILLED MATERI AL ON ABSORBENT & SWEEP INTO CLOSED
CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:FOR USE ONLY AS AN ANTI-ICING AGENT IN
HIGH FLASH JET FUEL ONLY. WHEN HANDLING, WEAR SAFETY GLASSES OR
GOGGLES AND IMPERVIOUS GLOVES.
Other Precautions:STORE ONLY IN CLOSED, PROPERLY LABELED CONTAINERS.
KEEP AWAY FROM HEAT, SPARKS AND FLAMES. USE PROPER PROPORTIONING
EQUIPMENT TO BLEND INTO FUEL. KEEP OUT OF REACH OF CHILDREN. AVOID
CONTACT WITH EYES AND SKIN. DO NOT SWALLOW.

Exposure Controls

Respiratory Protection:USE A HALF MASK FULL FACEPIECE ORGANIC VAPOR
CHEMICAL CARTRIDGE OR CANISTER RESPIRATOR WHEN CONCENTRATIONS
EXCEED PERMISSBILE LIMITS. USE SELF-CONTAINED BREATHING APPARATUS
OR FULL FACEPIECE AIRLINE R ESPIRATOR FOR EMERGENCY.
Ventilation:USE LOCAL EXHAUST OR DILUTION VENTILATION AS APPROPIATE TO
CONTROL EXPOSURES TO BELOW PERMISSIBLE LIMITS.
Protective Gloves:IMPERVIOUS, CHEMICAL RESISTANT, BUTYL.
Eye Protection:SPLASHPROOF GOGGLES IF POTENTIAL FOR SP.
Other Protective Equipment:BOOTS, APRONS OR CHEMICAL SUITS SHOULD BE
SUED WHEN NECESSARY TO PREVENT SKIN CONTACT.
Work Hygienic Practices:DO NOT EAT, DRINK OR SMOKE IN WORK AREA.
Supplemental Safety and Health
DO NOT INHALE. USE ONLY WITH ADEQUATE VENTILATION. COMBUSTIBLE.

Chemical Properties

HCC:V2
Boiling Pt:=192.8C, 379.F
Melt/Freeze Pt:=-85.C, -121.F
Vapor Pres:0.2 MM
Vapor Density:4.1
Spec Gravity:1.023
pH:7-8
Evaporation Rate & Reference:0.1 (N-BUTYL ACETATE=1)
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR, COLORLESS LIQUID, MILD PLESANT ODOR.
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTAMINATION WITH ALKALI AT ELEVATED TEMPERATURES.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:BURNING CAN PRODUCE CARBON MONOXIDE OR
CARBON DIOXIDE.

Disposal

Waste Disposal Methods:IT IS YOUR DUTY TO DISPOSE OF THE CHEMICAL
MAY=TERIAL &/OR THEIR CONTAINERS IN ACCORDANCE WITH THE CLEAN AIR
ACT, THE CLEAN WATER ACT, & RCRA, AS WELL AS ANY OTHER RELEVANT
FEDERAL, STATE OR LOCAL LAW S/REGULATIONS REGARDING DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.